Modified Design and Application of Electrically Heated Frame in Drying Device;
烘干設備電加熱框的改進設計與應用
The Control of Drying Conditions on Tea Mould Number;
烘干工藝條件對茶葉中霉菌的控制研究
The Analysis and Optimization of the Surface Temperature's Uneven Distribution of Two Deck Dryer
雙層烘缸表面溫度分布不均的分析和優化
cylinder wall surface temperature transducer
汽缸壁表面溫度發送器
Basic Principle of Design Calculation of Dryer Shell
造紙機用鑄鐵烘缸缸體設計計算的探討
The specimen surface should be polished, cleaned, and dried.
試樣表面則必須經過拋光，清洗和烘干處理。
Analysis of Cracks Formation on the φ2500 Cast-iron Dryer Cover
φ2500鑄鐵烘缸端蓋裂紋成因分析
Application of PLC in Electromagnetic Induction Heated Dryer for Paper Production
PLC在電磁感應加熱造紙烘缸中的應用
Mix all the ingredients for the topping. Take out the cake and slowly pour the topping over the cake. Return the cake to the oven and bake for another15 minutes.
混合表層裝飾的所有材料。取出蛋糕，輕輕將其倒在蛋糕表面上，放回烘烤繼續烘焙15分鐘左右。
Study on the technology of laser honing applied in machining the cylinder bore of engine
發動機氣缸孔表面的激光珩磨技術研究
Tribology Design for Bore Surface Topography of Combustion Engine
內燃機缸套表面形貌摩擦學設計的探討
Automatic Testing System for Engine Cylinder Bore Surface;
發動機缸孔表面缺陷自動檢測系統的研究
Influence of the Surface Texture on the Tribological Performances of Piston Skirt/Liner
表面織構對發動機活塞/缸套摩擦性能的影響
Frictional heat influenced by the surface pits of piston-cylinder
表面凹坑對活塞-缸套摩擦生熱過程的影響
Research on Microstructure and Properties of Nanometer ZrO_2 Coating on Cylinder Linder
發動機缸體表面納米ZrO_2涂層的組織性能研究
A New Liquid Plastic Mandrel Used in Finish Machining of Cylinders Outer Surface
一種實用的缸套外圓表面精加工液性塑料芯軸
Laser Texturing Technology of Engine Cylinder Sleeve Internal Surface
發動機氣缸套內表面激光造型加工技術
Study of surface strengthening technology and wear test of diesel engine cylinder liner
柴油機氣缸套表面強化工藝及磨損試驗的研究
The internal surface processing of hydraulic cylinder requires high accuracy of size, shape, and good deformed surface finish.
液壓缸內表面要求較高的尺寸精度、狀精度以及適宜的表面粗糙度。
Its function is to press the water out of the newly formed paper before it is passed on to the drying cylinders.
它在網部之后，作用是把剛成形的紙內水份壓出，然后往烘缸部烘干。